This image shows Bernd Bertsche

Bernd Bertsche

Prof. Dr.-Ing. (im Ruhestand)

Head of Institute
Institute of Machine Components

Contact

+49 711 685 66170
 +49 711 685 66319

Pfaffenwaldring 9
70569 Stuttgart
Germany
Room: 2.157

Subject

Reliability Engineering

  1. 2023

    1. Arndt, Marco ; Dazer, Martin ; Raither, Wolfram ; Bertsche, Bernd: Parameter assessment for reliability modeling of machine components using heuristic screening. In: Forschung im Ingenieurwesen. Bd. 2023 (2023) — IMA-ZUV peer-review

  2. 2022

    1. Waldhauser, Felix ; Dazer, Martin ; Bertsche, Bernd: Strahlenschutz am CERN: Wie können Ausfälle hochsensibler elektronischer Systeme aus der Ferne sicher vorhergesagt werden? In: WiGeP-News Dezember 2022. (2022), Nr. 2, S. 18–19 — IMA-ZUV 407
    2. Mell, Philipp ; Dazer, Martin ; Bertsche, Bernd: Wie lange läuft der E-Motor von morgen? In: WiGeP-News Juli 2022. (2022), Nr. 1, S. 9–10 — IMA-ZUV 395
    3. Efinger, Dshamil ; Ostertag, Andreas ; Dazer, Martin ; Borschewski, David ; Albrecht, Stefan ; Bertsche, Bernd: Reliability as a Key Driver for a Sustainable Design of Adaptive Load-Bearing Structures. In: Sustainability. (2022), Nr. 14(2) — IMA-ZUV 380 (peer-review)
    4. Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Efficient Reliability Demonstration using the Probability of Test Success  and Bayes Theorem. In: 16th Probabilistic Safety Assessment & Management Conference (PSAM 16), 2022 — IMA-ZUV 393 (peer-review)
    5. Arndt, Marco ; Dazer, Martin ; Bertsche, Bernd: Reliability-Based Decision Methodology for Stress-Strength Optimization of Machine Components. In: Proceedings of the Annual Reliability and Maintainability Symposium 2022, 2022. — ISBN 978-1-6654-2432-5 — IMA-ZUV (peer-review)
    6. Müller, Frank ; Dazer, Martin ; Bertsche, Bernd: Instandhaltbarkeit. In: Integrated Design Engineering - Interdisziplinäre und ganzheitliche Produktentwicklung. In: : Springer-Verlag, 2022. — ISBN 978-3-662-60438-0, S. 377–386
    7. Benz, Achim ; Grundler, Alexander ; Herzig, Thomas ; Dazer, Martin ; Bertsche, Bernd: Reliability Demonstration Test Planning for Field Load Spectra – an Approach for Identifying the Optimal Test Parameters considering Individual Cost and Time Constraints. In: Annual Reliability and Maintainability Symposium 2022 Proceedings, 2022. — ISBN 978-1-6654-2432-5 — IMA-ZUV 382 (peer-review)
    8. Mell, Philipp ; Karle, Fabian ; Herzig, Thomas ; Dazer, Martin ; Bertsche, Bernd: Accelerating Optimal Test Planning With Artificial Neural Networks. In: 2022 Annual Reliability and Maintainablity Symposium, 2022 — IMA-ZUV 371 (peer-review)
    9. Dazer, Martin ; Bertsche, Bernd ; Vajna, Sandor: Erfüllungsattribute. In: Integrated Design Engineering - Interdisziplinäre und ganzheitliche Produktentwicklung. In: : Springer-Verlag, 2022. — ISBN 978-3-662-60438-0, S. 429–468
    10. Benz, Achim ; Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Influence of Operating Load Spectra Shapes on Reliability Demonstration Test Planning. In: 16th Probabilistic Safety Assessment & Management Conference (PSAM 16), 2022 — IMA-ZUV 394 (peer-review)
    11. Hintz, Kim ; Diesch, Martin ; Dazer, Martin ; Bertsche, Bernd: Availability Analysis of Photovoltaic System Concepts to Derive Reliability Requirements for Inverter(s). In: Annual Reliability and Maintainability Symposium 2022 : IEEE, 2022 — IMA-ZUV 383

  3. 2021

    1. Herzig, Thomas ; Dazer, Martin ; Grundler, Alexander ; Bertsche, Bernd: Ressource-efficient Gear Wheel Design considering early planning of Reliability Demonstration Tests. In: Proceedings of NAFEMS Conference: Integration von Simulation und Test in der Produktentwicklung : NAFEMS Deutschland, Österreich, Schweiz GmbH, 2021 — IMA-ZUV 368 (peer-review)
    2. Karthaus, Carsten ; Behrendt, Harald ; Dazer, Martin ; Bertsche, Bernd: Effektivitätssteigerung eines Prüffelds  zur Fahrbarkeitsmessung durch  statistische Datenanalyse. In: ATZ - Automobiltechnische Zeitschrift. Bd. 123 (2021), Nr. 1, S. 68--72 — IMA-ZUV 355 (peer-review)
    3. Dazer, Martin ; Grundler, Alexander ; Herzig, Thomas ; Engert, Daniel ; Bertsche, Bernd: Effect of Interval Censoring on the Probability of Test Success in Reliability Demonstration. In: 2021 Annual Reliability and Maintainability Symposium (RAMS), 2021 — IMA-ZUV 363 (peer-review)
    4. Köhler, Armin ; Bertsche, Bernd: Cyclisation of Safety Diagnoses: Influence on the Evaluation of Fault Metrics. In: 2021 Proc. Ann. Reliability & Maintainability Symp., 2021. — ISBN 978-1-7281-8017-5 — IMA-ZUV 365 (peer-review)
    5. Köhler, Armin ; Bertsche, Bernd: Evidence of the Effectiveness of Cyclic Technical Safety Mechanisms. In: IEEE Access. Bd. 9 (2021), S. 82188–82198 — IMA-ZUV 366 (peer-review)
    6. Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Effect of Uncertainty in Prior Knowledge on Test Planning for a Brake Caliper using the Probability of Test Success. In: 2021 Proc. Ann. Reliability & Maintainability Symp. : IEEE, 2021. — ISBN 978-1-7281-8017-5 — IMA-ZUV 364 (peer-review)
    7. Ostertag, Andreas ; Dazer, Martin ; Bertsche, Bernd: METHODE ZUR ZUVERLÄSSIGEN, SICHEREN UND NACHHALTIGEN AUSLEGUNG ADAPTIVER TRAGWERKE. In: STUTTGARTER SYMPOSIUM FÜR PRODUKTENTWICKLUNG SSP 2021 : Universität Stuttgart, 2021 — IMA-ZUV 358 (peer-review)
    8. Gretzinger, Yvonne ; Kroner, Andreas ; Henß, Mark ; Dazer, Martin ; Bertsche, Bernd: Extended Evaluation of Pitting Degradation Tests to Increase the Remaining Useful Life of Gear Wheels. In: IOP Conf. Series: Materials Science and Engineering. Bd. 1097 (2021), Nr. 012006 — IMA-ZUV 247 (peer-review)
    9. Dazer, Martin ; Grundler, Alexander ; Gretzinger, Yvonne ; Bertsche, Bernd: Reliability in Product Design - The Key for Managing Uncertainty of New Technologies to Prevent Oversizing. In: 46th MPA-Seminar, 2021 — IMA-ZUV 377 (präsentation)
    10. Dazer, Martin ; Ostertag, Andreas ; Herzig, Thomas ; Borschewski, David ; Albrecht, Stefan ; Bertsche, Bernd: Consideration of reliability and sustainability in mechanical and civil engineering design to reduce oversizing without risking disasters. In: The 10Th International Conference on Life Cycle Management : E3S Web of Conferences, 2021 — IMA-ZUV 373 (peer-review)
    11. Benz, Achim ; Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Deriving Prior Knowledge from Lifetime Simulations for Reliability Demonstration while Considering the Uncertainty of the Lifetime Model. In: Proceedings of the 31st European Safety and Reliability Conference : Research Publishing, Singapore, 2021. — ISBN 978-981-18-2016-8 — IMA-ZUV 375 (peer-review)
    12. Arndt, Marco ; Dazer, Martin ; Rötting, Jens ; Bertsche, Bernd: Probabilistic Reliability Analysis of Screw Connections in Cast Aluminum Housings. In: Proceedings of the 31st European Safety and Reliability Conference : Research Publishing, Singapore, 2021. — ISBN 978-981-18-2016-8, S. 2791–2798 — IMA-ZUV 376 (peer-review)
    13. Mell, Philipp ; Herzig, Thomas ; Bertsche, Bernd: Nutzung von Neuronalen Netzen in der optimalen Zuverlässigkeitstestplanung. In: VDI-Berichte. Bd. 2377, 2021. — ISBN 978-3-18-092377-2 — IMA-ZUV 362
    14. Kroner, Andreas ; Herzig, Thomas ; Dazer, Martin ; Bertsche, Bernd: Method for non-destructive Condition Evaluation of Transmission Components for a second Product Life based on efficient Lifetime Tests. In: NAFEMS Integration von Simulation und Test in der Produktentwicklung, 2021 — IMA-ZUV 249 (peer-review)
    15. Benz, Achim ; Hintz, Kim ; Diesch, Martin ; Dazer, Martin ; Bertsche, Bernd: Zuverlässigkeitsanalyse von PV-Anlagen und Wechselrichtern. In: VDI-Fachtagung Technische Zuverlässigkeit 2021. Bd. VDI-Berichte 2377, 2021. — ISBN 978-3-18-092377-2 — IMA-ZUV 360 (peer-review)
    16. Grundler, Alexander ; Dazer, Martin ; Herzig, Thomas ; Bertsche, Bernd: Efficient System Reliability Demonstration Tests Using the Probability of Test Success. In: Proceedings of the 31st European Safety and Reliability Conference : Research Publishing, Singapore, 2021. — ISBN 978-981-18-2016-8 — IMA-ZUV 374
    17. Grundler, Alexander ; Göldenboth, Marcel ; Stoffers, Frédéric ; Dazer, Martin ; Bertsche, Bernd: Effiziente Zuverlässigkeitsabsicherung durch Berücksichtigung von Simulationsergebnissen am Beispiel einer Hochvolt-Batterie. In: 30. VDI-Fachtagung Technische Zuverlässigkeit 2021. Düsseldorf : VDI Verlag GmbH, 2021. — ISBN 978-3-18-092377-2, S. 75–88 — IMA-ZUV 359 (peer-review)
    18. Henss, Mark ; Yvonne, Gretzinger ; Tevetoglu, Tamer ; Posner, Maximilian ; Bertsche, Bernd: Learning an Optimal Operational Strategy for Service Life Extension of Gear Wheels with Double Deep Q Networks. In: , 2021 — IMA-ZUV 381
    19. Hintz, Kim ; Dazer, Martin ; Bertsche, Bernd: Zuverlässigkeitstechnik für eine effiziente Erzeugung erneuerbarer Energien. In: WiGeP-News Juli 2021. (2021) — IMA-ZUV 398
    20. Kilian, Philipp ; Köhler, Armin ; Van Bergen, Patrick ; Gebauer, Carsten ; Pfeufer, Bernd ; Koller, Oliver ; Bertsche, Bernd: Principle Guidelines for Safe Power Supply Systems Development. In: IEEE Access. Bd. 9 (2021), Nr. 9499031, S. 107751–107766 — IMA-ZUV 370 (peer-review)
    21. Kroner, Andreas ; Bertsche, Bernd: Ableitung von Grenzwerten für die Tauschaufbereitung auf Basis von Zuverlässigkeitsanalysen. In: VDI-Tagung „Technische Zuverlässigkeit“, 2021 — IMA-ZUV 248 (peer-review)
    22. Köhler, Armin ; Weber, Markus ; Bertsche, Bernd: Future Electrical Board Net Architectures for Cost Optimal Steering Gears. In: Next Generation Steering Systems Europe 2021, 2021 — IMA-ZUV 367 (Präsentation)

  4. 2020

    1. Köhler, Armin ; Bertsche, Bernd: An Approach of Fail Operational Power Supply for Next Generation Vehicle Powernet Architectures. In: Proceedings of the 30th European Safety and Reliability Conference ESREL 2020, The 15th Probabilistic Safety Assessment and Management Conference PSAM 15 : Research Publishing, Singapore, 2020. — ISBN 978-981-14-8593-0, S. 60–67 — IMA-ZUV 354 (peer-review)
    2. Dazer, Martin ; Grundler, Alexander ; Herzig, Thomas ; Bertsche, Bernd: R-OPTIMA - Optimal Planning of Reliability Tests. In: 7th International Conference Integrity-Reliability-Failure : INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2020. — ISBN 978-989-54756-1-2, S. 665–672 — IMA-ZUV 342
    3. Köhler, Armin ; Weber, Markus ; Bertsche, Bernd: Chassis Technology Faces Safe Power Supply: A Fail Active System Solution. In: ATZlive, chassis.tech plus 2020 11. Internationales Münchner Fahrwerk-Symposium : ATZlive, Springer Vieweg | Springer Fachmedien Wiesbaden GmbH, 2020 — IMA-ZUV 347 (Präsentation)
    4. Herzig, Thomas ; Dazer, Martin ; Grundler, Alexander ; Bertsche, Bernd: Integrating Accelerated Life Tests into Optimal Test Planning. In: 7th International Conference Integrity-Reliability-Failure, 2020, S. 665–672 — IMA-ZUV 341
    5. Tevetoglu, Tamer ; Bertsche, Bernd: Bias Corrected Weibull Parameter Estimation and Impact on Confidence Bounds. In: , 2020 — IMA-ZUV 352
    6. Diesch, Martin ; Dazer, Martin ; Lucan, Kevin ; Bubolz, Thomas ; Bertsche, Bernd: Soft Sensor Application to predict remaining useful Life of Components of the Exhaust System of Diesel Engines. In: Conference, Proc. RAMS 2020, 2020 — IMA-ZUV 337 (peer-review)
    7. Diesch, Martin ; Dazer, Martin ; Bubolz, Thomas ; Bertsche, Bernd: REMAINING USEFUL LIFE PREDICTION OF A TURBINE HOUSING USING A SOFT SENSOR APPROACH. In: 7th International Conference Integrity-Reliability-Failure, 2020, S. 711–718 — IMA-ZUV 345 (peer-review)
    8. Dazer, Martin ; Bertsche, Bernd ; Vajna, Sandor: Fulfilment Attributes. In: . 2. Aufl. : Springer Nature Switzerland AG 2020, 2020. — ISBN 978-3-030-19357-7, S. 383–418 — IMA-ZUV 349 (peer-review)
    9. Müller, Frank ; Zeiler, Peter ; Bertsche, Bernd: Coverage Probability of Methods for Steady-State Availability Inference with a Confidence Interval. In: Proceedings of the 30th European Safety and Reliability Conference and the 15th Probabilistic Safety Assessment and Management Conference, 2020 — IMA-ZUV 346 (peer-review)
    10. Kremer, Alexander ; Dücsö, Levente ; Bertsche, Bernd: Reliability Prediction using Design of Experiments. In: Proc. ESREL 2020 / PSAM 15 Conference, 2020 — IMA-ZUV 351
    11. Müller, Frank ; Dazer, Martin ; Bertsche, Bernd: Maintainability. In: Integrated Design Engineering : Springer Nature Switzerland AG, 2020. — ISBN 978-3-030-19356-0, S. 333–340 — IMA-ZUV 350
    12. Dazer, Martin ; Hügle, Dennis ; Bertsche, Bernd ; Messner, Maik ; Beck, Eberhard ; Mödden, Heinrich: Evaluation of upgrading options for single-channel mechatronic safety functions into category 2 structure according to ISO 13849 based on standard PLC’s. In: Proceedings of the 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference : Research publishing, 2020 — IMA-ZUV 344 (peer-review)
    13. Grundler, Alexander ; Dazer, Martin ; Herzig, Thomas ; Bertsche, Bernd: CONSIDERING MULTIPLE FAILURE MECHANISMS IN OPTIMAL TEST DESIGN. In: 7th International Conference Integrity-Reliability-Failure, 2020, S. 673–682 — IMA-ZUV 340
    14. Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Reliability-Test Planning Considering Multiple Failure Mechnaisms and System Levels – An Approach for Identifying the Optimal System-Test Level, Type, and Configuration with Regard to Individual Cost and Time Constraints. In: Annual Reliability and Maintainability Symposium, RAMS 2020, 2020 — IMA-ZUV 334 (peer-review)
    15. Ostertag, Andreas ; Schlegl, Friederike ; Gienger, Andreas ; Wagner, Julia ; Dazer, Martin ; Bertsche, Bernd ; Albrecht, Stefan ; Leistner, Philip ; u. a.: Reliable Design of Adaptive Load-bearing Structures with Focus on Sustainability. In: Proc. of the European Safety and Reliability Conf. and the Probabilistic Safety Assessment and Management Conf.. Singapore : Research Publishing, 2020 — IMA-ZUV 343 (peer-review)
    16. Gienger, A. ; Ostertag, A. ; Böhm, M. ; Bertsche, B. ; Sawodny, O. ; Tarín, C.: Data-Based Distributed Fault Diagnosis for Adaptive Structures using Convolutional Neural Networks. In: Unmanned Systems. (2020)
    17. Gretzinger, Yvonne ; Dazer, Martin ; Bertsche, Bernd: Using Life Data of Competing Failure Modes to Increase the Remaining Useful Life of Gear Wheels. In: RAMS 2020 Conference, 2020 — IMA-ZUV 244 (peer-review)
    18. Gretzinger, Yvonne ; Lucan, Kevin ; Stoll, Christian ; Bertsche, Bernd: Lifetime Extension of Gear Wheels using an Adaptive Operating Strategy. In: Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure, 2020, S. 703–710 — IMA-ZUV 245 (peer-review)
    19. Tevetoglu, Tamer ; Bertsche, Bernd: On the Coverage Probability of Bias-Corrected Confidence Bounds. In: , 2020 — IMA-ZUV 353 (peer-review)
    20. Göldenboth, Marcel ; Grundler, Alexander ; Bertsche, Bernd: Reliability demonstration within the framework of event-based endurance testing considering prior knowledge. In: Annual Reliability and Maintainability Symposium, RAMS 2020, 2020 — IMA-ZUV 335 (peer-review)
    21. Herzig, Thomas ; Dazer, Martin ; Grundler, Alexander ; Bertsche, Bernd: Evaluation of Optimality Criteria for Efficient Reliability Demonstration Testing. In: 30th European Safety and Reliability Conference ESREL 2020, The 15th Probabilistic Safety Assessment and Management Conference PSAM 15, 2020 — IMA-ZUV 348 (peer-review)
    22. Kroner, Andreas ; Luo, Zhenghe ; Bertsche, Bernd: Prediction of Remaining Useful Life of Transmission Components within a Remanufacturing Process to Ensure the Second Product Life. In: Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure, 2020 — IMA-ZUV 246 (peer-review)

  5. 2019

    1. Iglisch, Barbara ; Jetter, Stefan ; Bertsche, Bernd: Optimized random sampling for the load level method in Wöhler tests. In: Materials Testing. Bd. Jg. 61 (2019), Nr. Ausgabe 12, S. 1145–1151 — IMA-ZUV 328
    2. Köhler, Armin ; Münzing, Patrick ; Koller, Oliver ; Bertsche, Bernd: Keep Driving Safe by Ensuring Fail Operational Power Supply for Future Vehicle Applications. In: safetronic.2019 : Carl Hanser Verlag GmbH & Co. KG, 2019 — IMA-ZUV 333 (Präsentation)
    3. Lucan, Kevin ; Bertsche, Bernd: Standard-Lastkollektive für die Nutzfahrzeugbremse. In: Automobiltechnische Zeitschrift. (2019), Nr. 121, S. 78–83 — IMA-ZUV 314
    4. Bartholdt, M. ; Grundler, A. ; Bertsche, B.: Lernen aus Erfahrungen. In: Qualität und Zuverlässigkeit. Bd. Jahrgang 64, Verlag, Hanser (2019), S. S. 52 – 55 — IMA-ZUV 307 (peer-review)
    5. Kremer, Alexander ; Bertsche, Bernd: A New Approach for Parametrizing Multidimensional Lifetime Models. In: 29th European Safety and Reliability Conference, 2019. — ISBN 978-981-11-2724-3 — IMA-ZUV 324
    6. Herzig, Thomas ; Dazer, Martin ; Bertsche, Bernd: Zuverlässigkeitsabsicherung ressourcenschonender Produkte durch effiziente Erprobungsplanung. In: Stuttgarter Symposium für Produktentwicklung 2019, 2019 — IMA-ZUV 317 (peer-review)
    7. Gretzinger, Yvonne ; Dazer, Martin ; Bertsche, Bernd: Lebensdauerpotentiale bei der Schadensart Zahnradgrübchen. In: Dresdner Maschinenelemente Kolloquium : sierke Verlag, 2019. — ISBN 978-3-96548-055-1, S. 209–218
    8. Diesch, Martin ; Bertsche, Bertsche: Methodik zur Ermittlung systemspezifischer Lastkollektive zur Sicherstellung beanspruchungsgerecht dimensionierter Produkte. In: Stuttgarter Symposium für Produktentwicklung 2019, 2019 — IMA-ZUV 322 (peer-review)
    9. Diesch, Martin ; Bubolz, Thomas ; Dazer, Martin ; Lucan, Kevin ; Bertsche, Bernd: Application of virtual sensors for stress-related design and operation-specific lifetime prognosis. In: 14. Internationale MTZ-Fachtagung Großmotoren, 2019 — IMA-ZUV 331 (peer-review)
    10. Kremer, Alexander ; Bertsche, Bernd ; Scholzen, Andreas: The influence of environmental and manufacturing conditions on lifetime and reliability predictions for industrial timing belt drives (2019) — IMA-ZUV 325
    11. Herzig, Thomas ; Grundler, Alexander ; Dazer, Martin ; Bertsche, Bernd: Cost- and Time-effective Planning of Accelerated Reliability Demonstration Tests - A new Approach of comparing the Expenditure of Success Run and End-of-Life Tests. In: 2019 Annual Reliability and Maintainability Symposium (RAMS), 2019 — IMA-ZUV 312 (peer-review)
    12. Ostertag, Andreas ; Gienger, Andreas ; Bertsche, Bernd ; Tarín-Sauer, Cristina: Zuverlässigkeitsanalyse adaptiver Tragstrukturen in Gebäuden. In: DVM Workshop ZuMAS (Zuverlässigkeit mechatronischer und adaptronischer Systeme), 2019 — IMA-ZUV 313 (präsentation)
    13. Kremer, Alexander ; Bertsche, Bernd: A Methodology for Consideration of Uncertainty in Lifetime Design of Experiments. In: 2019 Annual Reliability and Maintainability Symposium (RAMS), 2019 — IMA-ZUV 309
    14. Lucan, Kevin ; Dazer, Martin ; Hintz, Kim ; Bertsche, Bernd: Effect of Competing Failure Modes on the System Reliability Estimation. In: RAMS 2019 Conference, 2019 — IMA-ZUV 311 (peer-review)
    15. Kremer, Alexander ; Bertsche, Bernd: Experimentelle Untersuchungen von Breitenfaktoren und der Alterung zur Verbesserung der Auslegung von industriellen Zahnriemengetrieben. In: 10. VDI-Fachkonferenz Umschlingungsgetriebe 2019, 2019 — IMA-ZUV 330
    16. Schleinkofer, Uwe ; Dazer, Martin ; Lucan, Kevin ; Mannuß, Oliver ; Bertsche, Bernd ; Bauernhansl, Thomas: Framework for Robust Design and Reliability Methods to Develop Frugal Manufacturing Systems. In: Procedia CIRP. Bd. 81 (2019), S. 518–523 — IMA-ZUV 321 (peer-review)
    17. Kremer, Alexander ; Bertsche, Bernd ; Scholzen, Andreas: Verbesserte Auslegung industrieller Zahnriemenantriebe durch Analyse von Breitenfaktoren und der Alterung. In: Dresdner Maschinenelemente Kolloquium 2019, 2019. — ISBN 978-3-96548-055-1 — IMA-ZUV 327
    18. Imle, Sebastian ; Winter, Tobias ; Popp, Julian ; Glaser, Markus ; Bertsche, Bernd: Safety and reliability analysis of an actuation system. In: ESREL 2019 Conference, 2019 — IMA-ZUV 332
    19. Henß, Mark ; Kemmler, Stefan ; Kremer, Alexander ; Bertsche, Bernd: Regression with individual weigths to prevent overfitting (2019) — IMA-ZUV 315
    20. Grundler, Alexander ; Bollmann, Martin ; Obermayr, Martin ; Bertsche, Bernd: Berücksichtigung von Lebensdauerberechnungen als Vorkenntnis im Zuverlässigkeitsnachweis. In: Tagung Technische Zuverlässigkeit 2019. Bd. 2345 : VDI, 2019. — ISBN 978-3-18-092345-1 — IMA-ZUV 326
    21. Ostertag, Andreas ; Toader, Traian-Nicu ; Bertsche, Bernd ; Sobek, Werner: System-Safety in the Application of Adaptive Load-Bearing Structures. In: RAMS 2019 Conference, 2019. — ISBN 978-1-5386-6555-1 — IMA-ZUV 310 (präsentation)

  6. 2018

    1. Kremer, A. ; Bertsche, B. ; Scholzen, A.: Ermittlung von lebensdauerbeeinflussenden Faktoren bei Zahnriemengetrieben. In: Antriebstechnik. Bd. Jahrgang 74, Vereinigte Fachverlage GmbH (2018), S. S.148-153 — IMA-ZUV 304
    2. Münzing, Patrick ; Ostertag, Andreas ; Koller, Oliver ; Bertsche, Bernd: Automated ASIL Allocation and Decomposition according to ISO 26262, Using the Example of Vehicle Electrical Systems for Automated Driving. In: SAE International. (2018), Nr. 11 — IMA-ZUV 298
    3. Dazer, M. ; Bräutigam, D. ; Leopold, T. ; Bertsche, B.: Optimal Planning of Reliability Life Tests Considering Prior Knowledge. In: 2018 Annual Reliability and Maintainability Symposium (RAMS), 2018, S. 1–7 — IMA-ZUV 292 (peer-review)
    4. Kremer, A. ; Bertsche, B.: Versuchsbasierte Lebensdauerprognose von Zahnriemengetrieben. In: DVM Workshop ZuMAS (Zuverlässigkeit mechatronischer und adaptronischer Systeme), 2018 — IMA-ZUV 294
    5. Kremer, A. ; Bertsche, B. ; Scholzen, A.: Methodik zur Prognose der Lebensdauer von Zahnriemengetrieben. In: Schweizer Maschinenelemente Kolloquium SMK 2018, 2018. — ISBN 978-3-95908-150-4 — IMA-ZUV 306
    6. Lucan, Kevin ; Dazer, Martin ; Waller, Jörg ; Bertsche, Bernd: Analysis of the Weibull Estimation for Competing Failure Modes. In: RAMS 2018 Conference, 2018 — IMA-ZUV 293 (peer-review)
    7. Müller, K. ; Dazer, M. ; Cheng Wen, P. ; Bertsche, B.: Fatigue Reliability Assessment For Floating Wind Turbines. In: Wind Europe Conference 2018, 2018 — IMA-ZUV 299 (peer-review)
    8. Grundler, Alexander ; Bartholdt, Michael ; Bertsche, Bernd: Statistical test planning using prior knowledge – advancing the approach of Beyer and Lauster. In: Proceedings of ESREL 2018, 2018. — ISBN 9781351174657, S. 809–814 — IMA-ZUV 297 (peer-review)
    9. Grundler, Alexander ; Bollmann, Martin ; Obermayr, Martin ; Bertsche, Bernd: Berücksichtigung von Berechnungs- und Simulationsergebnissen als Vorkenntnis in der Zuverlässigkeitsprognose und Testplanung. — IMA-ZUV 369 (präsentation)
    10. Long, F. ; Zeiler, P. ; Bertsche, B.: Realistic modelling of flexibility and dependence in production systems in Industry 4.0 for analysing their productivity and availability. In: Journal of Risk and Reliability. Bd. 232 (2018), Nr. 2, S. 174–184 — IMA-ZUV 295
    11. Heidinger, F. ; Hildebrandt, T. ; Ostertag, A. ; Fan, L. ; Beckmann, M. ; Löschel, R. ; Koller, O. ; Pfafferodt, M. ; u. a.: Simulation Based Powernet Analysis Regarding Efficiency and Reliability – Truck Battery Analysis as an Example. In: 8. Internationaler VDI-Kongress 2018, 2018 — IMA-ZUV 301
    12. Bartholdt, Michael ; Grundler, Alexander ; Bollmann, Martin ; Bertsche, Bernd: Assurance of the System Reliability of a Gearbox Considering Prior Knowledge. In: 15th International Design Conference, 2018, S. 965–974 — IMA-ZUV 296 (peer-review)
    13. Kremer, A. ; Bertsche, B.: Beschleunigte Zuverlässigkeitstests unter Berücksichtigung von Vertrauensbereichen. In: Forschung im Ingenieurwesen. Bd. 82. Berlin, Heidelberg, Springer (2018), Nr. 468, S. S. 1-15 — IMA-ZUV 303
    14. Ostertag, A. ; Heidinger, F. ; Bertsche, B.: Reliability Analysis of On-Board Power Supply Systems in Automated Vehicles. In: International Workshop on the Recent Technology Trend in Reliability and PHM Engineering 2018, 2018 — IMA-ZUV 300 (präsentation)
    15. Tevetoglu, Tamer ; Uznanski, Slawosz ; Todd, Benjamin ; Bertsche, Bernd: Quantitative reliability demonstration from production to operation on the example of the new radiation tolerant power converter controller for the Large Hadron Collider. In: PSAM 14, 2018 — IMA-ZUV 302 (peer-review)

  7. 2017

    1. Müller, Kolja ; Dazer, Martin ; Po Wen, Cheng: Damage Assessment of Floating Offshore Wind Turbines Using Response Surface Modeling. In: Energy Procedia. Bd. 137 (2017), S. 119–133 — IMA-ZUV 338 (peer-review)
    2. Jakob, Frank ; Kimmelmann, Martin ; Bertsche, Bernd: Selection of Acceleration Models for Test Planning and Model Usage. In: IEEE TRANSACTIONS ON RELIABILITY. Bd. 66, IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC (2017), Nr. 2, S. 298–308 — IMA-ZUV 285
    3. Müller, Frank ; Zeiler, Peter ; Bertsche, Bernd: Bootstrap-Monte-Carlo-Simulation von Zuverlässigkeit und Aussagewahrscheinlichkeit bei periodischer Instandhaltung (Bootstrap Monte Carlo Simulation of Reliability with Confidence Level regardin Periodical Maintenance). In: VDI-Berichte : VDI-Verlag, 2017. — ISBN 978-3-18-092307-9, S. 69–81 — IMA-ZUV 272
    4. Long, Fei ; Zeiler, Peter ; Bertsche, Bernd: Modelling the flexibility of production systems in Industry 4.0 for analysing their productivity and availability with high-level Petri nets. In: Proc. IFAC WC 2017 Conference. Bd. 1 : Elsevier, 2017, S. 5845–5852 — IMA-ZUV 286
    5. Henß, Mark ; Zeiler, Peter ; Bertsche, Bernd: Framework for a Uniform Description of Prognostics and Health Management. In: PHM Asia Pacific 2017 : Health Management Society, 2017. — ISBN 978-1-936263-27-1, S. 680–684 — IMA-ZUV 289
    6. Rieker, Tobias ; Barthold, Michael ; Bertsche, Bernd ; Zeiler, Peter ; Jacobi, Andreas: Zuverlässigkeitsprognose in der Anlaufphase für „x-Months-in-Service“ : Präzisierung und Validierung der Beanstandungsquote. In: VDI-Berichte : VDI-Verlag, 2017. — ISBN 978-3-18-092307-9, S. 43–54 — IMA-ZUV 274
    7. Dazer, Martin ; Höller, Peter ; Leopold, Tobias ; Bertsche, Bernd: Stochastic fatigue calculations using an accelerated 3-step multilinear kinematic hardening model of spheroidal graphite iron. In: Proceedings of the 7th International Conference on Mechanics and Materials in Design : INEGI-Instituto de Ciencia e Inovacao em Engenharia Mecanica e Gestao Industrial, 2017. — ISBN 978-989-98832-7-7, S. 217–228 — IMA-ZUV 278 (peer-review)
    8. Müller, Frank ; Zeiler, Peter ; Bertsche, Bernd: Bootstrap Monte Carlo Simulation of Reliability and Confidence Level with Periodical Maintenance. In: Forschung im Ingenieurwesen. Bd. 81, Springer (2017), Nr. 4, S. 383–393 — IMA-ZUV 287 (peer-review)

Dean of the Faculty 'Maschinenbau / Produktentwicklung und Konstruktionstechnik'

Director of 'Wissenschaftlichen Gesellschaft für Produktentwicklung e.V.'

 

Logo und Link zu WiGeP

  

Directly to
Head of institute Former staff & honorary professors Administration Secretary Drive Technology CAD Sealing Technology Railway Vehicle Technology Reliability Engineering Assistant lectureres Mechanical & electronic workshop
To the top of the page